Maximum Power 10Watt
Dimension 282*350*33 mm
Maximum Power Voltage 17.3Volts
Maximum Power current 0.58Amps
Open Circuit Voltage 21.7Volts
Short circuit Current 0.64Amps
Solar charge controller built-in solar module
MODEL: PVL-C3A
System Voltage 12V
Maximum Input Current 3A
Maximum Output Current 3A
Self-Consumption 6mA
Trickle Charge Activation 14.4V
LVD (Low Voltage disconnection) of the loads 11.2V
Loads voltage reconnection 12.4V
Operation Temperature –20℃ ~ +50℃
Dimensions 96*75*13.5 mm
Weight 150g
Connecting terminals 6㎜2
Normal Voltage 12Volts
Capacity @ 25℃ 8Ah
Maximum Charging Voltage 14.1Volts
Maximum Charging Current 2.1Amps
Dimension 151*66*96mm
Weight 2.6kg
DC lamp
MOEDL: PVL-LED010
Normal Power 1.0w@13V
Normal Voltage 12V-14V
Light Color Cool White
LED 20pcs
Lifespan 50,000Hours
Dimension ¢47*68mm
Weight 40g
MODEL: PVL-CFL070A
Normal Power 7w
Normal Voltage 12V-14V
Light Color Cool White
Ambient Temperature -5℃~+40℃
Lifespan 6,000~8,000Hours
Dimension ¢57*150mm
Weight 100g
Accessory (Fuse, cables, switch, E27 base)
Model Description Quanity Photo
PVL-N018 Cable 10meters
PVL-KO1O1 Switch 3pcs
PVL-BE27 E27 base 3pcs
PVL-S Screwdriver 1pcs
PVL-IT Insulating tape 1pcs
PVL-TM Terminal 1pcs
How to use
Place the solar module at North South direction. If not possible, let the panel
face the afternoon sun.
Tilt the solar panel at a proper angel depending on your local latitude.
The solar panel can be mounted on poles,
roof tops or other convenient locations.
The built in charge controller, inside the solar panel, increases the life of
battery and protects it from overcharge
and over discharge. Connect the cables from charge controller to battery and then
to super bright DC lamps.
Be sure to properly connect the polarities. The black cable is connected to –
(minus) and the white cable is connected
to + (plus) in the lighting kit.
Handle with care. Keep the panel clean from dust and dirt.
Application diagram
All Solar Panel Kits sold with out _batteries_
and all accessories above are included.!!!!!!!!!!!!